Sort älteste Beiträge zu erst Sort jüngste Beiträge zu erst

1.
th99
UNIDENTIFIED SP-160
Data bus:16-bit, ISA
Size:Half-length, full-height card
Hard drive supported:Two IDE (AT) Interface drives and up to seven SCSI devices
Floppy drives supported:Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
FunctionLocation
Game portCN1
25-pin parallel portCN2
10-pin serial port 1CN3
10-pin serial port 2CN4
40-pin IDE (AT) interface connectorCN5
34-pin control cable connector - floppy driveCN6
50-pin SCSI connector - internalCN7
50-pin SCSI connector - externalCN8
4-pin connector - drive active LED (IDE)CN9
4-pin connector - drive active LED (SCSI)CN10
USER CONFIGURABLE SETTINGS
FunctionLocationSetting
»Floppy drive enabledJP1pins 1 & 2 closed
 Floppy drive disabledJP1pins 3 & 4 closed
»Factory configured - do not alterJP4n/a
»AHA-1520 driver compatibility enabledJP7/jumper Aopen
 6360 compatibility enabledJP7/jumper Aclosed
»Factory configured - do not alterJP7/jumper Bn/a
USER CONFIGURABLE SETTINGS
FunctionLocationSetting
»Disconnect/reselect enabledJP7/jumper Cclosed
 Disconnect/reselect disabledJP7/jumper Copen
»Synchronous negotiation enabledJP7/jumper Dclosed
 Synchronous negotiation disabledJP7/jumper Dopen
»Boot-up with INT19 enabledJP7/jumper Eclosed
 Boot-up with INT19 disabledJP7/jumper Eopen
»Factory configured - do not alterJP7/jumper Fn/a
»Factory configured - do not alterJP7/jumper Gn/a
»Factory configured - do not alterJP7/jumper Hn/a
»SCSI parity enabledJP9/jumper Dopen
 SCSI parity disabledJP9/jumper Dclosed
»SCSI address = 340hJP10open
 SCSI address = 140hJP10closed
»Factory configured - do not alterW1n/a
»Factory configured - do not alterW2n/a
»Factory configured - do not alterW3n/a
IDE PORT CONFIGURATION
AddressJP2JP3
»Primarypins 1 & 2 closedpins 1 & 2 closed
 Secondarypins 1 & 2 closedpins 2 & 3 closed
 Disabledpins 2 & 3 closedall pins open
SCSI INTERRUPT SELECT
IRQJP6/AJP6/BJP6/CJP6/DRN19RN20RN21RN22
»11openopenclosedopennot installedinstallednot installednot installed
 9closedopenopenopennot installednot installednot installedinstalled
 10openclosedopenopennot installednot installedinstallednot installed
 12openopenopenclosedinstallednot installednot installednot installed
Note:RN19-RN22 are four-pin resistors.
BIOS ADDRESS - JP8
AddressJumper AJumper BJumper C
»D8000hclosedclosedclosed
 C8000hopenclosedclosed
 CC000hclosedopenopen
 D0000hclosedopenclosed
 D4000hclosedclosedopen
 Disabledopenopenclosed
SCSI ID - JP9
ID#Jumper AJumper BJumper C
»ID7closedclosedclosed
 ID0openopenopen
 ID1closedopenopen
 ID2openclosedopen
 ID3closedclosedopen
 ID4openopenclosed
 ID5closedopenclosed
 ID6openclosedclosed
SCSI ID
IRQJP6/AJP6/BJP6/CJP6/DRN19RN20RN21RN22
»IRQ11openopenclosedopennot installedinstallednot installednot installed
 IRQ9closedopenopenopennot installednot installednot installedinstalled
 IRQ10openclosedopenopennot installednot installedinstallednot installed
 IRQ12openopenopenclosedinstallednot installednot installednot installed
PARALLEL PORT CONFIGURATION
LPT/AddressRN2RN3RN4
»LPT2/378hinstallednot installednot installed
 LPT3/278hnot installedinstallednot installed
 Disablednot installednot installedinstalled
Note:RN2-RN4 are four-pin resistors.
SERIAL PORT 1 CONFIGURATION
COM/AddressRN8RN9RN10
»COM1/3F8hinstallednot installednot installed
 COM3/3E8hnot installedinstallednot installed
 Disablednot installednot installedinstalled
Note:RN8-RN10 are four-pin resistors.
SERIAL PORT 2 CONFIGURATION
COM/AddressRN5RN6RN7
»COM2/2F8hinstallednot installednot installed
 COM4/2E8hnot installedinstallednot installed
 Disablednot installednot installedinstalled
Note:RN5-RN7 are four-pin resistors.
(0)

timestamp 2026-06-19 20:23:11